This head has been pressure tested to check for cracks , ground flat on the gasket face and had the valves decoked and refaced , the seats recut , valves lapped in and valve clearances set by re shimming. It is ready to bolt straight onto a cylinder block of a N/A engine. The reason it is not on a vehicle is it was found that the block itself was pourous so a complete engine was fitted instead. This was actually from a 1988 pick up truck , but they were fitted to vehicles until quite recently and not just pick ups. The 2.0 turbo head is a slightly modified version of this , and I can alter this head to suit a turbo car as long as you still have the old turbo head as a pattern, condition not important. The head also comes with the rocker cover casting in perfect condition. Asking £68.Prefer collection as pretty heavy , but if not possible , contact me and we will see what we can do. It can be sent by courier but I would have to look into the price or you could arrange your own pick up and I will package.
192 visits